SCOTCHWELD EPOXY
EC-3501 ($75 EACH) (NORMALLY OVER $220 IF YOU CAN GET THEM)
AND
EC-2216 ($35 EACH) (NORMALLY OVER $200)
200ML MIX PACK
SANDS LIKE BUTTER
PAINTS REALLY WELL
MIXING STRAWS AVAILABLE FOR $4 EACH.
APPLICATION GUNS AVAILABLE ON AMAZON...$35-75
EC 3501
We developed 3M™ Scotch-Weld™ Epoxy Adhesive EC-3501 B/A as a two-part epoxy adhesive that rapidly cures at room temperature to form a tough bond. Our thixotropic adhesive is an ideal solution for filling pinholes in composites before painting. It is also effective on metals and many plastics. Our convenient cartridge packaging eliminates weighing and mixing operations.
We developed 3M™ Scotch-Weld™ Epoxy Adhesive EC-3501 B/A as a two-part epoxy adhesive that rapidly cures at room temperature to form a tough bond. Our thixotropic adhesive is an ideal solution for filling pinholes in composites before painting. It is also effective on metals and many plastics. It can be dispensed in duo-pak cartridges for use with the 3M™ EPX™ Applicator System for minimal waste and professional results. The mix ratio is 1:1 and the adhesive provides a 5-10 minute work life. The adhesive reaches handling strength in 90-120 minutes and is fully cured in 8 hours (at 72°F /22°C).
EC 3501 DATA SHEET
https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM8_vo8t9nv70k17zHvu9lxtD7SSSSSS--
EC 2216
Our 3M™ Scotch-Weld™ Epoxy Adhesive EC-2216 B/A Gray is a flexible, two-part, room-temperature curing epoxy adhesive that provides high shear and peel strength, making this an ideal adhesive for the most demanding aerospace applications. It maintains bond strength at low temperatures and stands up to challenging environmental conditions.
You can use this high-performance epoxy adhesive to replace mechanical fasteners, screws, rivets and spot welds. 3M™ Scotch-Weld™ Epoxy Adhesive EC-2216 B/A Gray is excellent for bonding a variety of substrates such a metals and many plastics. It can be dispensed in duo-pak cartridges for use with the 3M™ EPX™ Applicator System for minimal waste and professional results. The mix ratio is 2:3 and the adhesive provides a 90 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 12 hours and is fully cured in 7 days (at 72° F /22° C), but can be accelerated with heat. This epoxy is excellent for creating bonds that can be used at cryogenic temperatures. It's widely used for composite laminate edge sealing.
EC 2216 DATA SHEET
https://multimedia.3m.com/mws/media/594118O/3m-scotch-weld-epoxy-adhesive-ec-2216-b-a.pdf?&fn=TDS_EC-2216BA.pdf
3M™ Scotch-Weld™ Epoxy Adhesive EC-3501 B/A
3M Scotch-Weld™ Epoxy Adhesives EC-3501 B/A Gr
3M™ Scotch-Weld™ Epoxy Adhesive EC-2216 B/A …
